60000 Mile Service

• Body/chassis - Visually inspect for possible paint damage and corrosion, from the inside and outside, with the doors as well as hood and trunk lids open

• Brake system - Check for damage and leaks, condition of brake hoses and the presence of the bleeder caps; Check the thickness of the brake pads

• Connected box / OCU battery (for Audi Connected Services) -Check state health with Vehicle Diagnostic Tester in Guided Functions

• CTG Label - Check for CTG (Certification Test Group) label is present, undamaged, and legible in the engine compartment. Use the Vehicle Diagnostic Tester to verify the certification test group engine family number on the label matches the engine control module

• Door hinge (including door stay) and door latch - Lubricate

• Engine cooling system - Check freeze protection and coolant level

• Engine oil & oil filter - Change oil and replace filter

• Engine, transmission, final drive, steering (with front noise insulation removed) - Visual inspection for leaks and damage

• Every 20,000 miles

• Every 20,000 miles or 2 years, whichever occurs first

• Every 60,000 miles

• Exterior lighting - Check front and rear lights, turn signals, cornering lights, reverse lights, license plate lights, and hazard warning lights

• First aid kit - Check and enter expiration date YYYY / MM _________

• Headlights - Check adjustment

• Horn - Check function

• Instrument cluster - Check warning and indicator lights

• Interior lights - Check all interior lights, trunk lights and glove box compartment illumination

• Multi-point inspection - Complete (USA Only)

• Plenum chamber and water drain valves - Check for dirt. and clean if necessary NOTE: Time spent cleaning of item is a separate charge for service time

• Road test - Perform

• Safety belts- Check function

• Service reminder indicator display - Reset display

• Spare tire - Check condition and tire inflation pressure, adjust if necessary (if equipped)

• Sunroof systems - Check function (if equipped)

• Suspension and axle components (front and rear) - Check dust seals on ball joints and tie rod ends; check for excessive play

• Tire repair kit - Check and record the completeness and expiration date (if equipped)

• Tires - Check condition and tire tread wear; Check and record the tread depth

• Tires - Check tire inflation pressure and adjust if necessary

• Underbody - Check for damage and leaks, check the wheel well liners, underbody paneling and all lines are properly mounted

• Warning triangle - Check if present (if equipped)

• Windshield washer system - Add fluid if necessary; Check adjustment and function

• Wiper blades - Check condition and replace if necessary

70000 Mile Service Not Yet Due

• Brake system - Check the thickness of the brake pads

• Engine oil & oil filter - Change oil and replace filter All Vehicles

• Multi-point inspection - Complete All Vehicles

• Service reminder indicator display - Reset display All Vehicles

• Tire repair kit - Check and record the completeness and expiration date (if equipped)

80000 Mile Service Not Yet Due

• Body/chassis - Visually inspect for possible paint damage and corrosion, from the inside and outside, with the doors as well as hood and trunk lids open

• Brake system - Check for damage and leaks, condition of brake hoses and the presence of the bleeder caps; Check the thickness of the brake pads

• Connected box / OCU battery (for Audi Connected Services) -Check state health with Vehicle Diagnostic Tester in Guided Functions

• CTG Label - Check for CTG (Certification Test Group) label is present, undamaged, and legible in the engine compartment. Use the Vehicle Diagnostic Tester to verify the certification test group engine family number on the label matches the engine control module

• Door hinge (including door stay) and door latch - Lubricate

• Engine cooling system - Check freeze protection and coolant level

• Engine oil & oil filter - Change oil and replace filter

• Engine, transmission, final drive, steering (with front noise insulation removed) - Visual inspection for leaks and damage

• Every 20,000 miles

• Every 20,000 miles or 2 years, whichever occurs first

• Every 40,000 miles or 6 years, whichever occurs first

• Exterior lighting - Check front and rear lights, turn signals, cornering lights, reverse lights, license plate lights, and hazard warning lights

• First aid kit - Check and enter expiration date YYYY / MM _________

• Headlights - Check adjustment

• Horn - Check function

• Instrument cluster - Check warning and indicator lights

• Interior lights - Check all interior lights, trunk lights and glove box compartment illumination

• Multi-point inspection - Complete (USA Only)

• Plenum chamber and water drain valves - Check for dirt. and clean if necessary NOTE: Time spent cleaning of item is a separate charge for service time

• Road test - Perform

• Safety belts- Check function

• Service reminder indicator display - Reset display

• Spare tire - Check condition and tire inflation pressure, adjust if necessary (if equipped)

• Sunroof systems - Check function (if equipped)

• Suspension and axle components (front and rear) - Check dust seals on ball joints and tie rod ends; check for excessive play

• Tire repair kit - Check and record the completeness and expiration date (if equipped)

• Tires - Check condition and tire tread wear; Check and record the tread depth

• Tires - Check tire inflation pressure and adjust if necessary

• Underbody - Check for damage and leaks, check the wheel well liners, underbody paneling and all lines are properly mounted

• Warning triangle - Check if present (if equipped)

• Windshield washer system - Add fluid if necessary; Check adjustment and function

• Wiper blades - Check condition and replace if necessary